About to bite the bullet

Discuss all aspects of Ammunition and Reloading here.
User avatar
The Raven
Ultimate AusVarminter
Posts: 5914
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: About to bite the bullet

Post by The Raven »

Sako 22-250 wrote:Should have been a good morning for it,much of a crowd ?
Mark
The weather was excellent with a touch of wind coming out of the left side of the range.

Parking lot looked full when I arrived, with a queue to pay the fee. Luckily not overly crowded, and it thinned out after mid-day.

Damn some people had some loud ass rifles up the big end of the range. The hearing protection was really struggling.
User avatar
The Raven
Ultimate AusVarminter
Posts: 5914
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: About to bite the bullet

Post by The Raven »

Well here's today's result with reloads. Start left to right from the top.

1. Fired two shots with my current factory ammo to check sighting. Then try the reloads working up .5gn at a time. I blame the windage on....wind.
2. This was very promising.
3. Looking very nice...blaming the wind again.
4. Ok...
5. Very happy except for a flyer.
6. Hmm...
7. Back to factory ammo to double check.
reloads1sm.jpg
Happy for comments/analysis...
User avatar
Sako 22-250
.308 Winchester
Posts: 1620
Joined: Tue Oct 16, 2012 1:58 pm
Favourite Cartridge: 22-250
Location: Vic

Re: About to bite the bullet

Post by Sako 22-250 »

It likes the Blitzkings :D :D
User avatar
The Raven
Ultimate AusVarminter
Posts: 5914
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: About to bite the bullet

Post by The Raven »

Sako 22-250 wrote:It likes the Blitzkings :D :D
It definitely likes the Blitzkings. I may have to get me some of those...
Branxhunter
.338 Lapua Magnum
Posts: 2223
Joined: Sat Dec 10, 2011 7:49 pm
Favourite Cartridge: .20-222
Location: South west Victoria

Re: About to bite the bullet

Post by Branxhunter »

Great work Raven. Nothing like pulling the trigger on the first rounds you have loaded yourself. Looks like you have some promising loads to work on further - some tweaking of loaded length.

Marcus
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: About to bite the bullet

Post by trevort »

I used 50gn blitzkings when I had a 223. I have 24 50gn NBTs here if you want to test them
User avatar
The Raven
Ultimate AusVarminter
Posts: 5914
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: About to bite the bullet

Post by The Raven »

Branxhunter wrote:Great work Raven. Nothing like pulling the trigger on the first rounds you have loaded yourself. Looks like you have some promising loads to work on further - some tweaking of loaded length.

Marcus
Yep, it was a special moment pulling the trigger on that first round. A lot of apprehension, despite having checked everything a million times.

It was very reassuring that as I worked through the loads that they all chambered well, went bang when they were meant to, and didn't give a hint of any pressure problems etc.

The somewhat less than tight groups probably had more to do with me. I learnt so much with this first batch that I'm certain I can improve on it further next time. Consistency will be the key.

The load length was kept to published numbers, and it could probably do with fiddling at a later stage.
User avatar
The Raven
Ultimate AusVarminter
Posts: 5914
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: About to bite the bullet

Post by The Raven »

trevort wrote:I used 50gn blitzkings when I had a 223. I have 24 50gn NBTs here if you want to test them
The Blitzkings shoot very in my Predator. At the moment I'm using the OSA stuff, which provides the donor brass.

Thanks for the offer it's definitely something I'd like to try. However, I don't want to rush it yet and would like to keep everything the same until I get a bit more experience. After that I'm game to try anything :lol:
User avatar
stinkitup
.338 Lapua Magnum
Posts: 3217
Joined: Fri Aug 03, 2007 10:46 am
Favourite Cartridge: 6.5x55
Location: Lower Hunter Valley

Re: About to bite the bullet

Post by stinkitup »

I think groups 3 and 5 i think it is looks promising other than the flyer 5 is very good vertical


Nothing better than reloads for the first time. I remember first reloads in first new barrel which was also not standard and fireforming for an ai great feeling so well done!

The feeling is even better with a wildcat!

Look forward to the next round.

Ryan
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: About to bite the bullet

Post by trevort »

yep a few very promising targets there. :rifle:
User avatar
The Raven
Ultimate AusVarminter
Posts: 5914
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: About to bite the bullet

Post by The Raven »

Thanks for the comments guys. I know it's just a bunch of vague groupings but the challenge was to produce working reloads, and that was achieved.

I reloaded another batch tonight, taking on the experience from the weekend. Without pre-empting the results too much, this lot should be a bit more 'consistent' than the first. The process was a lot smoother and I had some idea what bits to focus on.

We'll see how this group goes later in the week. Slow and steady, but I'm really enjoying it so far.
Post Reply